TrinkwassermonitorTap water in Germany

Water hardness and tap water in Albsfelde

Kreis Herzogtum Lauenburg, Schleswig-Holstein · Postcode 23909

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Albsfelde has a total hardness of 14.5 °dH, hardness range “hard” (as of 27 May 2026). All tested parameters with a legal limit (8) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Vereinigte Stadtwerke. WaterScore (provisional): 100 out of 100 – the test report contains only 2 of 7 core parameters.

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate1.7 mg/L50 mg/L27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Nitrite0.01 mg/L0.5 mg/L
27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Chloride41 mg/L
250 mg/L27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Sulphate6.7 mg/L250 mg/L27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Sodium31 mg/L
200 mg/L27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Calcium86 mg/L–27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Magnesium11 mg/L–27 May 2026Vereinigte Stadtwerke Netz GmbHverified
pH7.436.5–9.527 May 2026Vereinigte Stadtwerke Netz GmbHverified
Total hardness14.5 °dH (hard)no legal limit27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Fluoride0.13 mg/L1.5 mg/L27 May 2026Vereinigte Stadtwerke Netz GmbHverified
Iron< 0.012 mg/L0.2 mg/L27 May 2026Vereinigte Stadtwerke Netz GmbHverified

Note from the test report (in the German original): Vereinigte Stadtwerke · Die Vereinigten Stadtwerke nennen Albsfelde auf ihrer Wasserqualitäts-Seite als Gemeinde, die aus dem Wasserwerk Alt-Möllner Straße versorgt wird. Die Werte stammen aus derselben Analyse wie für das Wasserwerk Alt-Möllner Straße in Mölln (Stand 27.05.2026) und gelten ab Wasserwerk. Welches Wasser an einer bestimmten Adresse ankommt, sagt verbindlich der Versorger.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

What the values mean for Albsfelde

Water hardness in Albsfelde in everyday life

At 14.5 °dH, Albsfelde is in the hardness range “hard” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Albsfelde next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Albsfelde are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Albsfelde
Sodium20 mg/l31 mg/l – above the bottled-water threshold
Nitrate10 mg/l1.7 mg/l – not above
Nitrite0.02 mg/l0.01 mg/l – not above
Sulphate240 mg/l6.7 mg/l – not above
Fluoride0.7 mg/l0.13 mg/l – not above
Manganese0.05 mg/lnot in the report
Arsenic0.005 mg/lnot in the report
Uranium0.002 mg/lnot in the report

Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Albsfelde

Can you drink the tap water in Albsfelde?

According to the verified values, yes: All tested parameters with a legal limit (8) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore (provisional): 100 out of 100 – the test report contains only 2 of 7 core parameters. This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Albsfelde?

The total hardness is 14.5 °dH – hardness range “hard”. Dose detergent for the hardness range “hard” – a larger amount is needed; a water softener for the washing machine can save detergent.

Is there PFAS in the tap water in Albsfelde?

The published analysis by Vereinigte Stadtwerke that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.

Do I need to filter my tap water in Albsfelde?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 2 of 7 core parameters. Not in the test report: Lead, Copper, Arsenic, Uranium and PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available and is therefore provisional. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2026): Tap water in Albsfelde. Values according to the water supplier’s test report, sampling date 27 May 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/albsfelde/

JSON: /api/v1/evidence?city=albsfelde

Data as of: 27 May 2026 · verified: 11 of 11 evaluated parameters.

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Albsfelde. Retrieved from https://trinkwassermonitor.ink/en/tap-water/albsfelde/.”

Further information