TrinkwassermonitorTap water in Germany

Water hardness and tap water in Bochum

Bochum, Nordrhein-Westfalen · Postcode 44787, 44789, 44791, 44793, 44892

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Bochum has a total hardness of 7.3 °dH, hardness range “soft” (as of 30 June 2026). All tested parameters with a legal limit (8) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Stadtwerke Bochum. WaterScore: 100 out of 100 (data coverage: 4 of 7 core parameters).

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate8.9 mg/L
50 mg/L30 June 2026Stadtwerke Bochumverified
Lead< 0.0005 mg/L0.01 mg/L
30 June 2026Stadtwerke Bochumverified
Uranium< 0.001 mg/L0.01 mg/L30 June 2026Stadtwerke Bochumverified
Copper0.014 mg/L2 mg/L30 June 2026Stadtwerke Bochumverified
Chloride42 mg/L
250 mg/L30 June 2026Stadtwerke Bochumverified
Sulphate34 mg/L
250 mg/L30 June 2026Stadtwerke Bochumverified
Sodium27 mg/L
200 mg/L30 June 2026Stadtwerke Bochumverified
Calcium41 mg/L–30 June 2026Stadtwerke Bochumverified
Magnesium6.9 mg/L–30 June 2026Stadtwerke Bochumverified
pH8.086.5–9.530 June 2026Stadtwerke Bochumverified
Total hardness7.3 °dH (soft)no legal limit30 June 2026Stadtwerke Bochumverified
Electrical conductivity414 µS/cm–30 June 2026Stadtwerke Bochumverified

Note from the test report (in the German original): Stadtwerke Bochum · Quartalsanalyse 01.04.–30.06.2026 für das Versorgungsgebiet Bochum ohne Langendreer und Werne (der überwiegende Teil des Stadtgebiets). Die Stadtteile Langendreer und Werne werden separat versorgt und messen ähnlich weiches Wasser (7,6 °dH / 1,36 mmol/l, Härtebereich weich), aber etwas niedrigere Leitfähigkeit (403 µS/cm) und Nitrat (8,7 mg/l). PFAS wird in keinem der beiden Bochumer Analyseformulare als Parameter ausgewiesen.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Bochum, 65 % of buildings with living space were built before 1970, and a further 12 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Bochum

Water hardness in Bochum in everyday life

At 7.3 °dH, Bochum is in the hardness range “soft” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Bochum next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Bochum are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Bochum
Sodium20 mg/l27 mg/l – above
Nitrate10 mg/l8.9 mg/l – not above
Nitrite0.02 mg/lnot in the report
Sulphate240 mg/l34 mg/l – not above
Fluoride0.7 mg/lnot in the report
Manganese0.05 mg/lnot in the report
Arsenic0.005 mg/lnot in the report
Uranium0.002 mg/lbelow the detection limit (0.001 mg/l) – not above

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks. Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Bochum

Can you drink the tap water in Bochum?

According to the verified values, yes: All tested parameters with a legal limit (8) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 100 out of 100 (data coverage: 4 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Bochum?

The total hardness is 7.3 °dH – hardness range “soft”. Dose detergent for the hardness range “soft” – the lowest amount on the pack.

Is there PFAS in the tap water in Bochum?

The published analysis by Stadtwerke Bochum that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.

Do I need to filter my tap water in Bochum?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 4 of 7 core parameters. Not in the test report: Nitrite, Arsenic and PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v3: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2026): Tap water in Bochum. Values according to the water supplier’s test report, sampling date 30 June 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/bochum/

JSON: /api/v1/evidence?city=bochum

Data as of: 30 June 2026 · verified: 12 of 12 evaluated parameters.

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Bochum. Retrieved from https://trinkwassermonitor.ink/en/tap-water/bochum/.”

Further information