TrinkwassermonitorTap water in Germany

Water hardness and tap water in Dernbach

Landkreis Südliche Weinstraße, Rheinland-Pfalz · Postcode 76857

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Dernbach has a total hardness of 8.6 °dH, hardness range “medium” (as of 23 May 2022). All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Stadt- und Verbandsgemeindewerke Annweiler. WaterScore: 81.1 out of 100 (data coverage: 6 of 7 core parameters).

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate7 mg/L
50 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Nitrite< 0.01 mg/L0.5 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Lead< 0.001 mg/L0.01 mg/L
23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Arsenic0.01 mg/L
0.01 mg/L
23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Uranium0.0013 mg/L
0.01 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Mercury< 0.0001 mg/L0.001 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Copper< 0.01 mg/L2 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Cadmium< 0.0002 mg/L0.003 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Chromium< 0.0005 mg/L0.025 mg/L
23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Nickel< 0.002 mg/L0.02 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Chloride18 mg/L250 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Sulphate16 mg/L250 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Sodium12.8 mg/L200 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Calcium40 mg/L–23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Magnesium12.9 mg/L–23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
pH8.066.5–9.523 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Total hardness8.6 °dH (medium)no legal limit23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Fluoride< 0.1 mg/L1.5 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Iron< 0.02 mg/L0.2 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Manganese< 0.005 mg/L0.05 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Ammonium< 0.05 mg/L0.5 mg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified
Trihalomethanes (THM)< 1 µg/L50 µg/L23 May 2022Stadt- und Verbandsgemeindewerke Annweiler (veröffentlicht im BDEW-Wasserportal)verified

Note from the test report (in the German original): Stadt- und Verbandsgemeindewerke Annweiler · Trinkwasseranalyse für das Versorgungsgebiet WVG 1 Nord-Ost, Stand 23.05.2022, veröffentlicht im BDEW-Wasserportal. Die Werte wurden automatisch aus dem PDF ausgelesen und einzeln gegengeprüft; die Seite steht beim Originalwert. Laut Wasserportal liegen der Ortsmittelpunkt von Dernbach und vier Prüfpunkte rund 1,5 km darum in diesem Versorgungsgebiet. Welches Wasser an einer bestimmten Adresse ankommt, sagt verbindlich der Versorger. Die Werte gelten ab Wasserwerk.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Dernbach, 57 % of buildings with living space were built before 1970, and a further 12 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Dernbach

Water hardness in Dernbach in everyday life

At 8.6 °dH, Dernbach is in the hardness range “medium” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Dernbach next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Dernbach are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Dernbach
Sodium20 mg/l12.8 mg/l – not above
Nitrate10 mg/l7 mg/l – not above
Nitrite0.02 mg/lbelow the detection limit (0.01 mg/l) – not above
Sulphate240 mg/l16 mg/l – not above
Fluoride0.7 mg/lbelow the detection limit (0.1 mg/l) – not above
Manganese0.05 mg/lbelow the detection limit (0.005 mg/l) – not above
Arsenic0.005 mg/l0.01 mg/l – above
Uranium0.002 mg/l0.0013 mg/l – not above

Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 12.8 mg/l, threshold below 20 mg/l).

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks. Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Dernbach

Can you drink the tap water in Dernbach?

According to the verified values, yes: All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 81.1 out of 100 (data coverage: 6 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Dernbach?

The total hardness is 8.6 °dH – hardness range “medium”. Dose detergent for the hardness range “medium”.

Is there PFAS in the tap water in Dernbach?

The published analysis by Stadt- und Verbandsgemeindewerke Annweiler that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.

Do I need to filter my tap water in Dernbach?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 6 of 7 core parameters. Not in the test report: PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v3: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2022): Tap water in Dernbach. Values according to the water supplier’s test report, sampling date 23 May 2022; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/dernbach/

JSON: /api/v1/evidence?city=dernbach

Data as of: 23 May 2022 · verified: 22 of 22 evaluated parameters. (older than twelve months – under § 46 TrinkwV your supplier must publish current values online)

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Dernbach. Retrieved from https://trinkwassermonitor.ink/en/tap-water/dernbach/.”

Further information