TrinkwassermonitorTap water in Germany

Water hardness and tap water in Gernsbach

Landkreis Rastatt, Baden-Württemberg · Postcode 76593

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Gernsbach has a total hardness of 9.52 °dH, hardness range “medium” (as of 8 May 2025). All tested parameters with a legal limit (11) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Stadtwerke Gernsbach. WaterScore (provisional): 98 out of 100 – the test report contains only 3 of 7 core parameters.

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate18 mg/L
50 mg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Nitrite< 0.02 mg/L0.5 mg/L
8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Uranium< 0.001 mg/L0.01 mg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Chromium< 0.0005 mg/L0.025 mg/L
8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Chloride11 mg/L250 mg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Sulphate18 mg/L250 mg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
pH7.526.5–9.58 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Total hardness9.52 °dH (medium)no legal limit8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Electrical conductivity387 µS/cm–8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Fluoride< 0.1 mg/L1.5 mg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Iron< 0.02 mg/L0.2 mg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Ammonium< 0.05 mg/L0.5 mg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Coliform bacteria0 KBE/100ml0 per 100 ml8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified
Trihalomethanes (THM)< 1 µg/L50 µg/L8 May 2025Stadtwerke Gernsbach (veröffentlicht im GW-Manager-Öffentlichkeitsportal)verified

Note from the test report (in the German original): Stadtwerke Gernsbach · Trinkwasseranalyse für das Versorgungsgebiet WVG Galgenbusch, Stand 08.05.2025, veröffentlicht im GW-Manager-Öffentlichkeitsportal (verlinkt im BDEW-Wasserportal). Die Werte sind unverändert aus der Datenschnittstelle des Portals übernommen. Laut Wasserportal liegen der Gemeindemittelpunkt von Gernsbach und vier Prüfpunkte rund 1,5 km darum in diesem Versorgungsgebiet. Einzelne Ortsteile können anderes Wasser bekommen; verbindlich ist die Auskunft des Versorgers. Die Werte gelten ab Wasserwerk.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Gernsbach, 53 % of buildings with living space were built before 1970, and a further 17 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Gernsbach

Water hardness in Gernsbach in everyday life

At 9.52 °dH, Gernsbach is in the hardness range “medium” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Gernsbach next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Gernsbach are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Gernsbach
Sodium20 mg/lnot in the report
Nitrate10 mg/l18 mg/l – above the bottled-water threshold
Nitrite0.02 mg/lbelow the detection limit (0.02 mg/l) – not above
Sulphate240 mg/l18 mg/l – not above
Fluoride0.7 mg/lbelow the detection limit (0.1 mg/l) – not above
Manganese0.05 mg/lnot in the report
Arsenic0.005 mg/lnot in the report
Uranium0.002 mg/lbelow the detection limit (0.001 mg/l) – not above

Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Gernsbach

Can you drink the tap water in Gernsbach?

According to the verified values, yes: All tested parameters with a legal limit (11) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore (provisional): 98 out of 100 – the test report contains only 3 of 7 core parameters. This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Gernsbach?

The total hardness is 9.52 °dH – hardness range “medium”. Dose detergent for the hardness range “medium”.

Is there PFAS in the tap water in Gernsbach?

The published analysis by Stadtwerke Gernsbach that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.

Do I need to filter my tap water in Gernsbach?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 3 of 7 core parameters. Not in the test report: Lead, Copper, Arsenic and PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available and is therefore provisional. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2025): Tap water in Gernsbach. Values according to the water supplier’s test report, sampling date 8 May 2025; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/gernsbach/

JSON: /api/v1/evidence?city=gernsbach

Data as of: 8 May 2025 · verified: 14 of 14 evaluated parameters. (older than twelve months – under § 46 TrinkwV your supplier must publish current values online)

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Gernsbach. Retrieved from https://trinkwassermonitor.ink/en/tap-water/gernsbach/.”

Further information