Water hardness and tap water in Merzig
Landkreis Merzig-Wadern, Saarland · Postcode 66663
This page is a translation of the German version; the German page is authoritative. German version · Report a translation error
- Limits of the Drinking Water OrdinancemetAll tested parameters (15), at the waterworks
- Water hardness7.42 °dH, softNo legal limit, only a range
- Data coverageCore parameters: 2 of 7Score provisional
Verified drinking-water values: water “Tiefenbohrung Seffersbachtal”
| Parameter | Value | Limit (TrinkwV) | Sampling date | Source | Status |
|---|---|---|---|---|---|
| Nitrate | 17.42 mg/L | 50 mg/L | December 2025 | Stadtwerke Merzig GmbH | verified |
| Nitrite | < 0.005 mg/L | 0.5 mg/L | December 2025 | Stadtwerke Merzig GmbH | verified |
| Chloride | 16.42 mg/L | 250 mg/L | December 2025 | Stadtwerke Merzig GmbH | verified |
| Sulphate | 8.5 mg/L | 250 mg/L | December 2025 | Stadtwerke Merzig GmbH | verified |
| Sodium | 5.64 mg/L | 200 mg/L | December 2025 | Stadtwerke Merzig GmbH | verified |
| Calcium | 28.12 mg/L | – | December 2025 | Stadtwerke Merzig GmbH | verified |
| Magnesium | 13.52 mg/L | – | December 2025 | Stadtwerke Merzig GmbH | verified |
| Total hardness | 7.42 °dH (soft) | no legal limit | December 2025 | Stadtwerke Merzig GmbH | verified |
Note from the test report (in the German original): Angaben der Stadtwerke-Seite, Stand 12/2025, für die Tiefenbohrung Seffersbachtal. Sie gilt für Merzig, Bietzen, Harlingen, Menningen, Merchingen und Besseringen links der Bezirkstraße. Die Seite nennt 7,42 °dH bei 1,26 mmol/l; aus Calcium und Magnesium ergeben sich 7,06 °dH, was auch zu den 1,26 mmol/l passt. Wir zeigen den gedruckten Wert. Für zwei Gebiete widerspricht sich die Seite, deshalb zeigen wir dort keine eigenen Werte: Besseringen rechts der Bezirkstraße (Tiefenbohrung Stocksbruch) steht mit 4,37 °dH bei Calcium 37,2 und Magnesium 19,4 mg/l, das wären rund 9,7 °dH; Wellingen (Tiefenbohrung Bethingen) steht mit 4,19 mmol/l und 11,74 °dH bei Calcium 42,9 und Magnesium 19,0 mg/l, das wären rund 10,4 °dH. Die Seite nennt keine Metalle, kein Uran, kein PFAS, keinen pH-Wert und keine Keime. Die Stadtwerke bereiten das Wasser laut Seite nicht auf.
Background on household plumbing, not a measurement: in Merzig, 57 % of buildings with living space were built before 1970, and a further 13 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)
What the values mean for Merzig
- Nitrate 17.42 mg/L – about 35 % of the limit of 50 mg/L and in the medium range – such values occur in catchments shaped by agriculture. Boiling does not reduce nitrate.
Water hardness in Merzig in everyday life
At 7.42 °dH, Merzig is in the hardness range “soft” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).
- Dose detergent for the hardness range “soft” – the lowest amount on the pack.
- Limescale deposits are rare; kettles and coffee machines only need descaling every few months.
- At this hardness you do not need limescale protection or a water softener.
Baby food and low sodium: tap water in Merzig next to the bottled-water thresholds
Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Merzig are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)
For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.
| Substance | Maximum level | Value in Merzig |
|---|---|---|
| Sodium | 20 mg/l | 5.64 mg/l – not above |
| Nitrate | 10 mg/l | 17.42 mg/l – above the bottled-water threshold |
| Nitrite | 0.02 mg/l | below the detection limit (0.005 mg/l) – not above |
| Sulphate | 240 mg/l | 8.5 mg/l – not above |
| Fluoride | 0.7 mg/l | not in the report |
| Manganese | 0.05 mg/l | not in the report |
| Arsenic | 0.005 mg/l | not in the report |
| Uranium | 0.002 mg/l | not in the report |
Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 5.64 mg/l, threshold below 20 mg/l).
Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).
Frequently asked questions about tap water in Merzig
Can you drink the tap water in Merzig?
According to the verified values, yes: All tested parameters with a legal limit (15) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore (provisional): 100 out of 100 – the test report contains only 2 of 7 core parameters. This applies to the water from the waterworks – restrictions can only arise from old household plumbing.
How hard is the water in Merzig?
It depends on the address: Tiefenbohrung Seffersbachtal 7.42 °dH, Tiefenbohrung Franzenbach 4.86 °dH and Tiefenbohrung Siebend 3.87 °dH – all in the hardness range “soft”. Dose detergent for the hardness range “soft” – the lowest amount on the pack.
Is there PFAS in the tap water in Merzig?
The published analysis by Stadtwerke Merzig that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result. For the other waters, the analyses give no PFAS value.
Do I need to filter my tap water in Merzig?
Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.
WaterScore
- Total (provisional)100 / 100
- Chemical safety100 / 100
- Nutrients100 / 100
- General parameters100 / 100
- Data timeliness100 / 100
- Data quality100 / 100
Data coverage: 2 of 7 core parameters. Not in the test report: Lead, Copper, Arsenic, Uranium and PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available and is therefore provisional. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.
Evidence: cite and check
- Wasserqualität, Trinkwasseranalysen der Merziger Ortsteile, Stand 12/2025 (Stadtwerke Merzig GmbH)
Suggested citation: Trinkwassermonitor (2025): Tap water in Merzig. Values according to the water supplier’s test report, sampling date December 2025; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/merzig/
JSON: /api/v1/evidence?city=merzig
Data as of: December 2025 · verified: 8 of 8 evaluated parameters.
This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Merzig. Retrieved from https://trinkwassermonitor.ink/en/tap-water/merzig/.”