TrinkwassermonitorTap water in Germany

Water hardness and tap water in Münsingen

Landkreis Reutlingen, Baden-Württemberg · Postcode 72525

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Münsingen has a total hardness of 18 °dH, hardness range “hard” (as of April 2026). All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Stadtwerke Münsingen. WaterScore: 100 out of 100 (data coverage: 6 of 7 core parameters).

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate16 mg/L
50 mg/LApril 2026Stadtwerke Münsingenverified
Nitrite< 0.01 mg/L0.5 mg/L
April 2026Stadtwerke Münsingenverified
Lead< 0.001 mg/L0.01 mg/L
April 2026Stadtwerke Münsingenverified
Arsenic< 0.001 mg/L0.01 mg/L
April 2026Stadtwerke Münsingenverified
Uranium0.0002 mg/L0.01 mg/LApril 2026Stadtwerke Münsingenverified
Mercury< 0.0001 mg/L0.001 mg/LApril 2026Stadtwerke Münsingenverified
Copper0.024 mg/L2 mg/LApril 2026Stadtwerke Münsingenverified
Cadmium< 0.0001 mg/L0.003 mg/LApril 2026Stadtwerke Münsingenverified
Chromium< 0.0006 mg/L0.025 mg/L
April 2026Stadtwerke Münsingenverified
Nickel< 0.001 mg/L0.02 mg/LApril 2026Stadtwerke Münsingenverified
Chloride36 mg/L
250 mg/LApril 2026Stadtwerke Münsingenverified
Sulphate9.5 mg/L250 mg/LApril 2026Stadtwerke Münsingenverified
Sodium17.6 mg/L200 mg/LApril 2026Stadtwerke Münsingenverified
Calcium123 mg/L–April 2026Stadtwerke Münsingenverified
Magnesium3.6 mg/L–April 2026Stadtwerke Münsingenverified
pH7.326.5–9.5April 2026Stadtwerke Münsingenverified
Total hardness18 °dH (hard)no legal limitApril 2026Stadtwerke Münsingenverified
Electrical conductivity689 µS/cm–April 2026Stadtwerke Münsingenverified
Fluoride< 0.05 mg/L1.5 mg/LApril 2026Stadtwerke Münsingenverified
Iron< 0.005 mg/L0.2 mg/LApril 2026Stadtwerke Münsingenverified
Manganese< 0.001 mg/L0.05 mg/LApril 2026Stadtwerke Münsingenverified
Ammonium< 0.01 mg/L0.5 mg/LApril 2026Stadtwerke Münsingenverified
Trihalomethanes (THM)3.3 µg/L50 µg/LJuly 2025Stadtwerke Münsingenverified

Note from the test report (in the German original): Stadtwerke Münsingen · Chemische Trinkwasseranalyse der Albwasserversorgungsgruppen, Albgruppe XIII Stand 04/2026 (ohne Tagesangabe und ohne Labor). Das Blatt stellt vier Gruppen nebeneinander; hier steht die Albgruppe XIII, zu der laut Blatt Münsingen, Apfelstetten, Rietheim, Dottingen, Trailfingen und Auingen gehören. Die anderen Gruppen (Albgruppe VIII/IX, Lautertalgruppe, Albgruppe VI) versorgen weitere Ortsteile mit anderen Werten, etwa Nitrat 14,8 bis 24 mg/l und Gesamthärte 17 bis 19 °dH. Gesamthärte der Albgruppe XIII: 3,22 mmol/l (rund 18,0 °dH, Härtebereich hart). Summe PFAS-20 und PFAS-4: nicht berechenbar (n. b.). Welches Wasser an einer bestimmten Adresse ankommt, sagt verbindlich der Versorger. Stadtwerke Münsingen · Chemische Trinkwasseranalyse der Albwasserversorgungsgruppen, Stand 07/2025 (ohne Tagesangabe und ohne Labor). Das Blatt stellt vier Gruppen nebeneinander; hier steht die Albgruppe XIII, zu der laut Blatt Münsingen, Apfelstetten, Rietheim, Dottingen, Trailfingen und Auingen gehören. Die anderen Gruppen (Albgruppe VIII/IX, Lautertalgruppe, Albgruppe VI) versorgen weitere Ortsteile mit anderen Werten, etwa Nitrat 15,3 bis 24 mg/l und Gesamthärte 16,7 bis 18,8 °dH. Gesamthärte der Albgruppe XIII: 18,4 °dH (3,28 mmol/l, Härtebereich hart). Summe PFAS-20 und PFAS-4: nicht bestimmt. Welches Wasser an einer bestimmten Adresse ankommt, sagt verbindlich der Versorger.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Münsingen, 44 % of buildings with living space were built before 1970, and a further 12 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Münsingen

Water hardness in Münsingen in everyday life

At 18 °dH, Münsingen is in the hardness range “hard” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Münsingen next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Münsingen are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Münsingen
Sodium20 mg/l17.6 mg/l – not above
Nitrate10 mg/l16 mg/l – above the bottled-water threshold
Nitrite0.02 mg/lbelow the detection limit (0.01 mg/l) – not above
Sulphate240 mg/l9.5 mg/l – not above
Fluoride0.7 mg/lbelow the detection limit (0.05 mg/l) – not above
Manganese0.05 mg/lbelow the detection limit (0.001 mg/l) – not above
Arsenic0.005 mg/lbelow the detection limit (0.001 mg/l) – not above
Uranium0.002 mg/l0.0002 mg/l – not above

Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 17.6 mg/l, threshold below 20 mg/l).

Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Münsingen

Can you drink the tap water in Münsingen?

According to the verified values, yes: All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 100 out of 100 (data coverage: 6 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Münsingen?

The total hardness is 18 °dH – hardness range “hard”. Dose detergent for the hardness range “hard” – a larger amount is needed; a water softener for the washing machine can save detergent.

Is there PFAS in the tap water in Münsingen?

The published analysis by Stadtwerke Münsingen that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.

Do I need to filter my tap water in Münsingen?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 6 of 7 core parameters. Not in the test report: PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2026): Tap water in Münsingen. Values according to the water supplier’s test report, sampling date April 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/muensingen/

JSON: /api/v1/evidence?city=muensingen

Data as of: April 2026 · verified: 23 of 23 evaluated parameters.

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Münsingen. Retrieved from https://trinkwassermonitor.ink/en/tap-water/muensingen/.”

Further information