Water hardness and tap water in Putzbrunn
Landkreis München, Bayern · Postcode 85640
This page is a translation of the German version; the German page is authoritative. German version · Report a translation error
- Limits of the Drinking Water OrdinancemetAll tested parameters (20), at the waterworks
- Water hardness17.4 °dH, hardNo legal limit, only a range
- Data coverageCore parameters: 7 of 7Score based on complete data
Verified drinking-water values
| Parameter | Value | Limit (TrinkwV) | Sampling date | Source | Status |
|---|---|---|---|---|---|
| Nitrate | 10 mg/L | 50 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Nitrite | < 0.05 mg/L | 0.5 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| PFAS (sum) | < 0.005 µg/L | 0.1 µg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Lead | < 0.001 mg/L | 0.01 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Arsenic | < 0.0004 mg/L | 0.01 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Uranium | < 0.001 mg/L | 0.01 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Mercury | < 0.0001 mg/L | 0.001 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Copper | < 0.2 mg/L | 2 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Cadmium | < 0.0003 mg/L | 0.003 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Chromium | < 0.001 mg/L | 0.025 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Nickel | < 0.002 mg/L | 0.02 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Chloride | 12.4 mg/L | 250 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Sulphate | 16.5 mg/L | 250 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Sodium | 7.1 mg/L | 200 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Calcium | 86.3 mg/L | – | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Magnesium | 23.2 mg/L | – | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| pH | 7.42 | 6.5–9.5 | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Total hardness | 17.4 °dH (hard) | no legal limit | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Electrical conductivity | 602 µS/cm | – | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Fluoride | < 0.2 mg/L | 1.5 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Iron | < 0.02 mg/L | 0.2 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Manganese | < 0.005 mg/L | 0.05 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Ammonium | < 0.05 mg/L | 0.5 mg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
| Trihalomethanes (THM) | < 1 µg/L | 50 µg/L | 17 June 2026 | Gemeindewerke Putzbrunn | verified |
Note from the test report (in the German original): Gemeindewerke Putzbrunn · Prüfbericht des SWM-Labors vom 29.06.2026, Probe vom 17.06.2026 an der Entnahmestelle Gemeinde Putzbrunn, Friedhof, Niedweg 15 (Netzprobe). Der Bericht nennt nur diese Entnahmestelle. Gesamthärte 17,4 °dH (hart). Summe PFAS-20 und PFAS-4 jeweils unter 0,005 µg/l. Welches Wasser an einer bestimmten Adresse ankommt, sagt verbindlich der Versorger.
Background on household plumbing, not a measurement: in Putzbrunn, 20 % of buildings with living space were built before 1970, and a further 22 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)
What the values mean for Putzbrunn
- Nitrate 10 mg/L – about 20 % of the limit of 50 mg/L and in the medium range – such values occur in catchments shaped by agriculture. Boiling does not reduce nitrate.
- PFAS (sum of PFAS-20) – not detectable in the sample evaluated. The limit of 0.1 µg/L (100 ng/L) has applied since 12 January 2026.
- Lead – not detectable at the waterworks. Lead gets into the water almost only through old lead pipes in household plumbing, not via the supplier.
- Uranium – not detectable at the waterworks (limit 10 µg/L).
- pH 7.42 – within the range of the Drinking Water Ordinance (6.5 to 9.5). The pH determines how corrosive the water is in household plumbing.
Water hardness in Putzbrunn in everyday life
At 17.4 °dH, Putzbrunn is in the hardness range “hard” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).
- Dose detergent for the hardness range “hard” – a larger amount is needed; a water softener for the washing machine can save detergent.
- Limescale builds up quickly: descale the kettle about every two to three weeks, and taps and shower heads too.
- In your own house, limescale protection or a water softener can be worthwhile at this hardness; in a rented flat, the owner decides.
Baby food and low sodium: tap water in Putzbrunn next to the bottled-water thresholds
Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Putzbrunn are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)
For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.
| Substance | Maximum level | Value in Putzbrunn |
|---|---|---|
| Sodium | 20 mg/l | 7.1 mg/l – not above |
| Nitrate | 10 mg/l | 10 mg/l – not above |
| Nitrite | 0.02 mg/l | below the detection limit (0.05 mg/l) – cannot be assessed |
| Sulphate | 240 mg/l | 16.5 mg/l – not above |
| Fluoride | 0.7 mg/l | below the detection limit (0.2 mg/l) – not above |
| Manganese | 0.05 mg/l | below the detection limit (0.005 mg/l) – not above |
| Arsenic | 0.005 mg/l | below the detection limit (0.0004 mg/l) – not above |
| Uranium | 0.002 mg/l | below the detection limit (0.001 mg/l) – not above |
Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 7.1 mg/l, threshold below 20 mg/l).
Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).
Frequently asked questions about tap water in Putzbrunn
Can you drink the tap water in Putzbrunn?
According to the verified values, yes: All tested parameters with a legal limit (20) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 100 out of 100 (data coverage: 7 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.
How hard is the water in Putzbrunn?
The total hardness is 17.4 °dH – hardness range “hard”. Dose detergent for the hardness range “hard” – a larger amount is needed; a water softener for the washing machine can save detergent.
Is there PFAS in the tap water in Putzbrunn?
Not in measurable amounts: according to the published analysis by Gemeindewerke Putzbrunn (as of 17 June 2026), PFAS were below the laboratory’s limit of quantification. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. This means the sum of the four substances PFOA, PFOS, PFNA and PFHxS (PFAS-4) is also below the limit of 0.02 µg/l, which applies from 12 January 2028.
Do I need to filter my tap water in Putzbrunn?
Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.
WaterScore
- Total100 / 100
- Chemical safety100 / 100
- Heavy metals100 / 100
- PFAS100 / 100
- Nutrients100 / 100
- General parameters100 / 100
- Data timeliness100 / 100
- Data quality100 / 100
Data coverage: 7 of 7 core parameters. Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.
Evidence: cite and check
- Untersuchung Trinkwasser Juli 2026 (SWM-Prüfbericht 2026062477, Probe vom 17.06.2026) (Gemeindewerke Putzbrunn) · SHA-256 of the evaluated file: f777061d7af5d7bf…, checked on 2 November 2026
Suggested citation: Trinkwassermonitor (2026): Tap water in Putzbrunn. Values according to the water supplier’s test report, sampling date 17 June 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/putzbrunn/
JSON: /api/v1/evidence?city=putzbrunn
Data as of: 17 June 2026 · verified: 24 of 24 evaluated parameters.
This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Putzbrunn. Retrieved from https://trinkwassermonitor.ink/en/tap-water/putzbrunn/.”