TrinkwassermonitorTap water in Germany

Water hardness and tap water in Roth

Landkreis Roth, Bayern · Postcode 91154

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Roth has a total hardness of 8.8 °dH, hardness range “medium” (as of July 2026). All tested parameters with a legal limit (17) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Stadtwerke Roth. WaterScore: 93.8 out of 100 (data coverage: 5 of 7 core parameters).

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate3.2 mg/L50 mg/LJuly 2026Stadtwerke Rothverified
Nitrite< 0.03 mg/L0.5 mg/L
July 2026Stadtwerke Rothverified
Lead< 0.001 mg/L0.01 mg/L
July 2026Stadtwerke Rothverified
Arsenic0.008 mg/L
0.01 mg/L
July 2026Stadtwerke Rothverified
Uranium0.001 mg/L
0.01 mg/LJuly 2026Stadtwerke Rothverified
Mercury< 0.00003 mg/L0.001 mg/LJuly 2026Stadtwerke Rothverified
Cadmium< 0.0001 mg/L0.003 mg/LJuly 2026Stadtwerke Rothverified
Chromium< 0.0005 mg/L0.025 mg/L
July 2026Stadtwerke Rothverified
Nickel< 0.002 mg/L0.02 mg/LJuly 2026Stadtwerke Rothverified
Chloride25 mg/L
250 mg/LJuly 2026Stadtwerke Rothverified
Sulphate27 mg/L
250 mg/LJuly 2026Stadtwerke Rothverified
Sodium15 mg/L200 mg/LJuly 2026Stadtwerke Rothverified
Calcium45 mg/L–July 2026Stadtwerke Rothverified
Magnesium11 mg/L–July 2026Stadtwerke Rothverified
pH7.86.5–9.5July 2026Stadtwerke Rothverified
Total hardness8.8 °dH (medium)no legal limitJuly 2026Stadtwerke Rothverified
Electrical conductivity392 µS/cm–July 2026Stadtwerke Rothverified
Fluoride1.1 mg/L
1.5 mg/LJuly 2026Stadtwerke Rothverified
Iron< 0.005 mg/L0.2 mg/LJuly 2026Stadtwerke Rothverified
Manganese< 0.001 mg/L0.05 mg/LJuly 2026Stadtwerke Rothverified
Ammonium< 0.05 mg/L0.5 mg/LJuly 2026Stadtwerke Rothverified

Note from the test report (in the German original): Ergebnisse der Trinkwasseruntersuchung 2026 der Stadtwerke Roth, Stand Juli 2026; das Blatt nennt kein Probenahmedatum. Es stellt drei Gebiete nebeneinander: Roth Nord und Roth Süd (beide 8,8 °dH, Härtebereich mittel) und Eckersmühlen mit Hofstetten und Haimpfarrich (6,3 °dH, weich). Hier steht Roth Nord. Roth Süd weicht kaum ab (Natrium 12 statt 15 mg/l, Chlorid 21 statt 25, Fluorid 0,91 statt 1,1, Arsen 0,007 statt 0,008 mg/l, Uran unter 0,001 mg/l; Temperatur 20,1 °C an der Probestelle). Eckersmühlen: Calcium 35, Magnesium 6, Natrium 2,3 mg/l, Fluorid 0,20, Arsen 0,004. Arsen und Fluorid liegen in Roth unter den Grenzwerten (0,01 und 1,5 mg/l), aber im oberen Bereich. Härte laut Blatt, Leitfähigkeit bei 25 °C.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Roth, 37 % of buildings with living space were built before 1970, and a further 17 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Roth

Water hardness in Roth in everyday life

At 8.8 °dH, Roth is in the hardness range “medium” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Roth next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Roth are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Roth
Sodium20 mg/l15 mg/l – not above
Nitrate10 mg/l3.2 mg/l – not above
Nitrite0.02 mg/lbelow the detection limit (0.03 mg/l) – cannot be assessed
Sulphate240 mg/l27 mg/l – not above
Fluoride0.7 mg/l1.1 mg/l – above the bottled-water threshold
Manganese0.05 mg/lbelow the detection limit (0.001 mg/l) – not above
Arsenic0.005 mg/l0.008 mg/l – above the bottled-water threshold
Uranium0.002 mg/l0.001 mg/l – not above

Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 15 mg/l, threshold below 20 mg/l).

Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Roth

Can you drink the tap water in Roth?

According to the verified values, yes: All tested parameters with a legal limit (17) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 93.8 out of 100 (data coverage: 5 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Roth?

The total hardness is 8.8 °dH – hardness range “medium”. Dose detergent for the hardness range “medium”.

Is there PFAS in the tap water in Roth?

The published analysis by Stadtwerke Roth that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.

Do I need to filter my tap water in Roth?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 5 of 7 core parameters. Not in the test report: Copper and PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2026): Tap water in Roth. Values according to the water supplier’s test report, sampling date July 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/roth/

JSON: /api/v1/evidence?city=roth

Data as of: July 2026 · verified: 21 of 21 evaluated parameters.

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Roth. Retrieved from https://trinkwassermonitor.ink/en/tap-water/roth/.”

Further information