Water hardness and tap water in Ruppach-Goldhausen
Westerwaldkreis, Rheinland-Pfalz · Postcode 56412
This page is a translation of the German version; the German page is authoritative. German version · Report a translation error
- Limits of the Drinking Water OrdinancemetThe tested parameter, at the waterworks
- Water hardness4.5 °dH, softNo legal limit, only a range
- Data coverageCore parameters: 0 of 7Score provisional
Verified drinking-water values
| Parameter | Value | Limit (TrinkwV) | Sampling date | Source | Status |
|---|---|---|---|---|---|
| pH | 8.69 | 6.5–9.5 | 2025 | Verbandsgemeindewerke Montabaur | verified |
| Total hardness | 4.5 °dH (soft) | no legal limit | 2025 | Verbandsgemeindewerke Montabaur | verified |
| Electrical conductivity | 194 µS/cm | – | 2025 | Verbandsgemeindewerke Montabaur | verified |
Note from the test report (in the German original): Verbandsgemeindewerke Montabaur · Bekanntmachung der Trinkwasserproben aus dem Jahr 2025; das Blatt nennt je Ort nur das Jahr und die Prüfberichtsnummer. Für Ruppach-Goldhausen steht Wasserbezug HB+AB Rupberg. Die Liste gibt pH-Wert, Gesamthärte und Leitfähigkeit an und nennt für die Härte einen Schwankungsbereich. Laut Blatt ergab eine PFAS-Untersuchung am 06.06.2025 keine Funde; einen Zahlenwert nennt es nicht. Welches Wasser an einer bestimmten Adresse ankommt, sagt verbindlich der Versorger.
Background on household plumbing, not a measurement: in Ruppach-Goldhausen, 49 % of buildings with living space were built before 1970, and a further 11 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)
What the values mean for Ruppach-Goldhausen
- pH 8.69 – within the range of the Drinking Water Ordinance (6.5 to 9.5). The pH determines how corrosive the water is in household plumbing.
Water hardness in Ruppach-Goldhausen in everyday life
At 4.5 °dH, Ruppach-Goldhausen is in the hardness range “soft” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).
- Dose detergent for the hardness range “soft” – the lowest amount on the pack.
- Limescale deposits are rare; kettles and coffee machines only need descaling every few months.
- At this hardness you do not need limescale protection or a water softener.
Frequently asked questions about tap water in Ruppach-Goldhausen
Can you drink the tap water in Ruppach-Goldhausen?
According to the verified values, yes: The tested parameter with a legal limit meets the limit set by the German Drinking Water Ordinance (TrinkwV). WaterScore (provisional): 88.6 out of 100 – the test report contains only 0 of 7 core parameters. This applies to the water from the waterworks – restrictions can only arise from old household plumbing.
How hard is the water in Ruppach-Goldhausen?
The total hardness is 4.5 °dH – hardness range “soft”. Dose detergent for the hardness range “soft” – the lowest amount on the pack.
Is there PFAS in the tap water in Ruppach-Goldhausen?
The published analysis by Verbandsgemeindewerke Montabaur that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.
Do I need to filter my tap water in Ruppach-Goldhausen?
Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.
WaterScore
- Total (provisional)88.6 / 100
- Data timeliness100 / 100
- Data quality80 / 100
Data coverage: 0 of 7 core parameters. Not in the test report: Nitrate, Nitrite, Lead, Copper, Arsenic, Uranium and PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available and is therefore provisional. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.
Evidence: cite and check
- Untersuchungsergebnisse der Trinkwasserproben 2025 aus den Versorgungsanlagen der Verbandsgemeinde Montabaur (Verbandsgemeindewerke Montabaur) · SHA-256 of the evaluated file: 45b4b5c674da9d4b…, checked on 2 November 2026
Suggested citation: Trinkwassermonitor (2025): Tap water in Ruppach-Goldhausen. Values according to the water supplier’s test report, sampling date 2025; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/ruppach-goldhausen/
JSON: /api/v1/evidence?city=ruppach-goldhausen
Data as of: 2025 · verified: 3 of 3 evaluated parameters.
This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Ruppach-Goldhausen. Retrieved from https://trinkwassermonitor.ink/en/tap-water/ruppach-goldhausen/.”