TrinkwassermonitorTap water in Germany

Water hardness and tap water in Schutterwald

Ortenaukreis, Baden-Württemberg · Postcode 77746

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Schutterwald has a total hardness of 12.1 °dH, hardness range “medium” (as of 29 July 2025). All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Gemeindewerke Schutterwald. WaterScore: 99.3 out of 100 (data coverage: 7 of 7 core parameters).

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate18.8 mg/L
50 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Nitrite< 0.005 mg/L0.5 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
PFAS (sum)0.003 µg/L0.1 µg/L

29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Lead< 0.001 mg/L0.01 mg/L
29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Arsenic< 0.001 mg/L0.01 mg/L
29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Uranium0.0003 mg/L0.01 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Mercury< 0.0001 mg/L0.001 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Copper0.01 mg/L2 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Cadmium< 0.0001 mg/L0.003 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Chromium< 0.001 mg/L0.025 mg/L
29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Nickel< 0.001 mg/L0.02 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Chloride57 mg/L
250 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Sulphate21 mg/L250 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Sodium29 mg/L
200 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
pH7.66.5–9.529 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Total hardness12.1 °dH (medium)no legal limit29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Electrical conductivity581 µS/cm–29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Fluoride0.1 mg/L1.5 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Iron< 0.01 mg/L0.2 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Manganese< 0.003 mg/L0.05 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Ammonium< 0.01 mg/L0.5 mg/L29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified
Coliform bacteria0 KBE/100ml0 per 100 ml29 July 2025Gemeindewerke Schutterwald (veröffentlicht im BDEW-Wasserportal)verified

Note from the test report (in the German original): Gemeindewerke Schutterwald · Trinkwasseranalyse für das Versorgungsgebiet Schutterwald, Stand 29.07.2025, veröffentlicht im BDEW-Wasserportal. Die Werte wurden automatisch aus dem PDF ausgelesen und einzeln gegengeprüft; die Seite steht beim Originalwert. Laut Wasserportal liegen der Ortsmittelpunkt von Schutterwald und vier Prüfpunkte rund 1,5 km darum in diesem Versorgungsgebiet. Welches Wasser an einer bestimmten Adresse ankommt, sagt verbindlich der Versorger. Die Werte gelten ab Wasserwerk.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Schutterwald, 40 % of buildings with living space were built before 1970, and a further 18 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Schutterwald

Water hardness in Schutterwald in everyday life

At 12.1 °dH, Schutterwald is in the hardness range “medium” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Schutterwald next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Schutterwald are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Schutterwald
Sodium20 mg/l29 mg/l – above
Nitrate10 mg/l18.8 mg/l – above
Nitrite0.02 mg/lbelow the detection limit (0.005 mg/l) – not above
Sulphate240 mg/l21 mg/l – not above
Fluoride0.7 mg/l0.1 mg/l – not above
Manganese0.05 mg/lbelow the detection limit (0.003 mg/l) – not above
Arsenic0.005 mg/lbelow the detection limit (0.001 mg/l) – not above
Uranium0.002 mg/l0.0003 mg/l – not above

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks. Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Schutterwald

Can you drink the tap water in Schutterwald?

According to the verified values, yes: All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 99.3 out of 100 (data coverage: 7 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Schutterwald?

The total hardness is 12.1 °dH – hardness range “medium”. Dose detergent for the hardness range “medium”.

Is there PFAS in the tap water in Schutterwald?

Yes, in measurable amounts: according to the published analysis by Gemeindewerke Schutterwald (as of 29 July 2025), the sum of PFAS-20 is 0.003 µg/l – that is 3 % of the limit of 0.1 µg/l, which has applied since 12 January 2026. Even this sum of all 20 substances is below the limit of 0.02 µg/l that applies from 12 January 2028 to the sum of four of them (PFAS-4).

Do I need to filter my tap water in Schutterwald?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 7 of 7 core parameters. Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v3: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2025): Tap water in Schutterwald. Values according to the water supplier’s test report, sampling date 29 July 2025; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/schutterwald/

JSON: /api/v1/evidence?city=schutterwald

Data as of: 29 July 2025 · verified: 22 of 22 evaluated parameters. (older than twelve months – under § 46 TrinkwV your supplier must publish current values online)

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Schutterwald. Retrieved from https://trinkwassermonitor.ink/en/tap-water/schutterwald/.”

Further information