TrinkwassermonitorTap water in Germany

Water hardness and tap water in Schweitenkirchen

Landkreis Pfaffenhofen a.d.Ilm, Bayern · Postcode 85301

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Schweitenkirchen has a total hardness of 15 °dH, hardness range “hard” (as of 16 July 2026). All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Wasserzweckverband Paunzhausen. WaterScore: 100 out of 100 (data coverage: 7 of 7 core parameters).

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate4.3 mg/L50 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Nitrite< 0.02 mg/L0.5 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
PFAS (sum)below the limit of quantification0.1 µg/L

16 July 2026Wasserzweckverband Paunzhausenverified
PFOA< 0.001 µg/L–16 July 2026Wasserzweckverband Paunzhausenverified
PFOS< 0.001 µg/L–16 July 2026Wasserzweckverband Paunzhausenverified
PFHxS< 0.001 µg/L–16 July 2026Wasserzweckverband Paunzhausenverified
PFBS< 0.001 µg/L–16 July 2026Wasserzweckverband Paunzhausenverified
PFNA< 0.001 µg/L–16 July 2026Wasserzweckverband Paunzhausenverified
Lead< 0.001 mg/L0.01 mg/L
16 July 2026Wasserzweckverband Paunzhausenverified
Arsenic< 0.001 mg/L0.01 mg/L
16 July 2026Wasserzweckverband Paunzhausenverified
Uranium0.001 mg/L
0.01 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Mercury< 0.0001 mg/L0.001 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Copper0.006 mg/L2 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Cadmium< 0.0003 mg/L0.003 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Chromium< 0.0005 mg/L0.025 mg/L
16 July 2026Wasserzweckverband Paunzhausenverified
Nickel< 0.002 mg/L0.02 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Chloride9.1 mg/L250 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Sulphate26 mg/L
250 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Sodium5.6 mg/L200 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Calcium63.1 mg/L–16 July 2026Wasserzweckverband Paunzhausenverified
Magnesium26.8 mg/L–16 July 2026Wasserzweckverband Paunzhausenverified
pH7.896.5–9.516 July 2026Wasserzweckverband Paunzhausenverified
Total hardness15 °dH (hard)no legal limit16 July 2026Wasserzweckverband Paunzhausenverified
Electrical conductivity507 µS/cm–16 July 2026Wasserzweckverband Paunzhausenverified
Fluoride0.14 mg/L1.5 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Iron< 0.005 mg/L0.2 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Manganese< 0.005 mg/L0.05 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Ammonium< 0.01 mg/L0.5 mg/L16 July 2026Wasserzweckverband Paunzhausenverified
Coliform bacteria0 KBE/100ml0 per 100 ml16 July 2026Wasserzweckverband Paunzhausenverified
Trihalomethanes (THM)0 µg/L50 µg/L16 July 2026Wasserzweckverband Paunzhausenverified
Säurekapazität bis pH 4,34.74 mmol/L–16 July 2026Wasserzweckverband Paunzhausenverified

Note from the test report (in the German original): Wasserzweckverband Paunzhausen · Prüfbericht der AGROLAB Wasseranalytik GmbH vom 24.07.2026 (Analysennummer 236589), Probe vom 16.07.2026, Messpunkt Rathaus Paunzhausen, Freisinger Str. 6, Küche 1. OG – also an einer Zapfstelle im Gebäude, nicht ab Wasserwerk; Kupfer und Blei können dort von der Hausinstallation beeinflusst sein. Der Verband fördert aus drei Brunnen in Paunzhausen und bereitet im Wasserwerk Paunzhausen auf; laut Verbandsseite versorgt er die Gemeinde Schweitenkirchen mit ihren Ortsteilen. Es ist eine Einzelprobe. Die Summen PFAS-20 und PFAS-4 gibt der Bericht als „n.b.“ an (Einzelstoffe unter der Bestimmungsgrenze).

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Schweitenkirchen, 19 % of buildings with living space were built before 1970, and a further 18 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Schweitenkirchen

Water hardness in Schweitenkirchen in everyday life

At 15 °dH, Schweitenkirchen is in the hardness range “hard” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Schweitenkirchen next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Schweitenkirchen are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Schweitenkirchen
Sodium20 mg/l5.6 mg/l – not above
Nitrate10 mg/l4.3 mg/l – not above
Nitrite0.02 mg/lbelow the detection limit (0.02 mg/l) – not above
Sulphate240 mg/l26 mg/l – not above
Fluoride0.7 mg/l0.14 mg/l – not above
Manganese0.05 mg/lbelow the detection limit (0.005 mg/l) – not above
Arsenic0.005 mg/lbelow the detection limit (0.001 mg/l) – not above
Uranium0.002 mg/l0.001 mg/l – not above

Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 5.6 mg/l, threshold below 20 mg/l).

Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Schweitenkirchen

Can you drink the tap water in Schweitenkirchen?

According to the verified values, yes: All tested parameters with a legal limit (19) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 100 out of 100 (data coverage: 7 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Schweitenkirchen?

The total hardness is 15 °dH – hardness range “hard”. Dose detergent for the hardness range “hard” – a larger amount is needed; a water softener for the washing machine can save detergent.

Is there PFAS in the tap water in Schweitenkirchen?

Not in measurable amounts: according to the published analysis by Wasserzweckverband Paunzhausen (as of 16 July 2026), PFAS were below the laboratory’s limit of quantification. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20.

Do I need to filter my tap water in Schweitenkirchen?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 7 of 7 core parameters. Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2026): Tap water in Schweitenkirchen. Values according to the water supplier’s test report, sampling date 16 July 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/schweitenkirchen/

JSON: /api/v1/evidence?city=schweitenkirchen

Data as of: 16 July 2026 · verified: 31 of 31 evaluated parameters.

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Schweitenkirchen. Retrieved from https://trinkwassermonitor.ink/en/tap-water/schweitenkirchen/.”

Further information