Tap water in Spenge
Kreis Herford, Nordrhein-Westfalen · Postcode 32139
This page is a translation of the German version; the German page is authoritative. German version · Report a translation error
- Limits of the Drinking Water OrdinancemetAll tested parameters (9), at the waterworks
- Data coverageCore parameters: 4 of 7Score based on complete data
Verified drinking-water values
Note from the test report (in the German original): Stadtwerke Herford GmbH · Trinkwasseranalyse für das Versorgungsgebiet Spenge, Stand Juni 2026, veröffentlicht im BDEW-Wasserportal. Die Werte wurden automatisch aus dem PDF ausgelesen und einzeln gegengeprüft; die Seite steht beim Originalwert. Laut Wasserportal liegen der Gemeindemittelpunkt von Spenge und vier Prüfpunkte rund 1,5 km darum in diesem Versorgungsgebiet. Einzelne Ortsteile können anderes Wasser bekommen; verbindlich ist die Auskunft des Versorgers. Die Werte gelten ab Wasserwerk.
Background on household plumbing, not a measurement: in Spenge, 50 % of buildings with living space were built before 1970, and a further 14 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)
What the values mean for Spenge
- PFAS (sum of PFAS-20) – not detectable in the sample evaluated. The limit of 0.1 µg/L (100 ng/L) has applied since 12 January 2026.
- Lead – not detectable at the waterworks. Lead gets into the water almost only through old lead pipes in household plumbing, not via the supplier.
- Uranium – not detectable at the waterworks (limit 10 µg/L).
- pH 7.39 – within the range of the Drinking Water Ordinance (6.5 to 9.5). The pH determines how corrosive the water is in household plumbing.
Baby food and low sodium: tap water in Spenge next to the bottled-water thresholds
Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Spenge are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)
For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.
| Substance | Maximum level | Value in Spenge |
|---|---|---|
| Sodium | 20 mg/l | 11.2 mg/l – not above |
| Nitrate | 10 mg/l | not in the report |
| Nitrite | 0.02 mg/l | below the detection limit (0.02 mg/l) – not above |
| Sulphate | 240 mg/l | not in the report |
| Fluoride | 0.7 mg/l | 0.14 mg/l – not above |
| Manganese | 0.05 mg/l | below the detection limit (0.01 mg/l) – not above |
| Arsenic | 0.005 mg/l | not in the report |
| Uranium | 0.002 mg/l | below the detection limit (0.00029 mg/l) – not above |
Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 11.2 mg/l, threshold below 20 mg/l).
Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).
Frequently asked questions about tap water in Spenge
Can you drink the tap water in Spenge?
According to the verified values, yes: All tested parameters with a legal limit (9) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 100 out of 100 (data coverage: 4 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.
Is there PFAS in the tap water in Spenge?
Not in measurable amounts: according to the published analysis by Stadtwerke Herford GmbH (as of June 2026), PFAS were below the laboratory’s limit of quantification. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20.
Do I need to filter my tap water in Spenge?
Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.
WaterScore
- Total100 / 100
- Chemical safety100 / 100
- Heavy metals100 / 100
- PFAS100 / 100
- Nutrients100 / 100
- General parameters100 / 100
- Data timeliness100 / 100
- Data quality100 / 100
Data coverage: 4 of 7 core parameters. Not in the test report: Nitrate, Copper and Arsenic. Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.
Evidence: cite and check
- Trinkwasseranalyse Versorgungsgebiet Spenge, Stand Juni 2026 (Stadtwerke Herford GmbH (veröffentlicht im BDEW-Wasserportal)) · SHA-256 of the evaluated file: bba6624cc90ac66b…, checked on 2 November 2026
Suggested citation: Trinkwassermonitor (2026): Tap water in Spenge. Values according to the water supplier’s test report, sampling date June 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/spenge/
JSON: /api/v1/evidence?city=spenge
Data as of: June 2026 · verified: 12 of 12 evaluated parameters.
This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Spenge. Retrieved from https://trinkwassermonitor.ink/en/tap-water/spenge/.”