TrinkwassermonitorTap water in Germany

Water hardness and tap water in Tespe

Landkreis Harburg, Niedersachsen · Postcode 21395

This page is a translation of the German version; the German page is authoritative. German version · Report a translation error

Short answer: The tap water in Tespe has a total hardness of 9.65 °dH, hardness range “medium” (as of 9 March 2026). All tested parameters with a legal limit (15) meet the limits set by the German Drinking Water Ordinance (TrinkwV). Source: test report by Wasserbeschaffungsverband Harburg. WaterScore: 100 out of 100 (data coverage: 4 of 7 core parameters).

Verified drinking-water values

ParameterValueLimit (TrinkwV)Sampling dateSourceStatus
Nitrate1.2 mg/L50 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Lead< 0.001 mg/L0.01 mg/L
9 March 2026Wasserbeschaffungsverband Harburgverified
Arsenic< 0.001 mg/L0.01 mg/L
9 March 2026Wasserbeschaffungsverband Harburgverified
Uranium< 0.00001 mg/L0.01 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Mercury< 0.0001 mg/L0.001 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Cadmium< 0.0003 mg/L0.003 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Chromium< 0.0005 mg/L0.025 mg/L
9 March 2026Wasserbeschaffungsverband Harburgverified
Nickel< 0.002 mg/L0.02 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Chloride30.4 mg/L
250 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Sulphate8.2 mg/L250 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Sodium25.6 mg/L
200 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Calcium57.9 mg/L–9 March 2026Wasserbeschaffungsverband Harburgverified
Magnesium6.91 mg/L–9 March 2026Wasserbeschaffungsverband Harburgverified
pH7.56.5–9.59 March 2026Wasserbeschaffungsverband Harburgverified
Total hardness9.65 °dH (medium)no legal limit9 March 2026Wasserbeschaffungsverband Harburgverified
Electrical conductivity465 µS/cm–9 March 2026Wasserbeschaffungsverband Harburgverified
Fluoride0.11 mg/L1.5 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Iron< 0.003 mg/L0.2 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified
Manganese< 0.002 mg/L0.05 mg/L9 March 2026Wasserbeschaffungsverband Harburgverified

Note from the test report (in the German original): Wasserbeschaffungsverband Harburg · Die Ortsabfrage des Verbands ordnet Tespe dem Wasserwerk Lüdershausen zu und führt diese Ortsteile: Avendorf, Bütlingen, Tespe. Die Werte sind Mittelwerte aller Analysen vom 01.01.2025 bis 09.03.2026; hier steht das Enddatum. Stoffe, deren Proben teils unter der Bestimmungsgrenze lagen, sind nicht als Zahl übernommen, weil ein solcher Mittelwert nicht aussagekräftig ist. Andere Ortsteile können anderes Wasser bekommen; verbindlich ist die Auskunft des Versorgers.

Is a value wrong or out of date? Report an error – we check every report against the original source.

Water at your own tap: The values describe the water the supplier delivers – not automatically the water at your tap. The water supplier is responsible up to the service connection (Hausanschluss); the building owner is responsible for the pipes beyond it. Lead can dissolve from lead pipes, leaded solder joints or old brass fittings, especially when water has stood in the pipes for a long time (stagnant water); this mainly affects buildings constructed before about 1973. If water has stood in the pipes for several hours, let it run until it comes out cool. If you suspect lead pipes, a lead analysis of the stagnant water by an accredited laboratory will help.

Background on household plumbing, not a measurement: in Tespe, 23 % of buildings with living space were built before 1970, and a further 21 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)

What the values mean for Tespe

Water hardness in Tespe in everyday life

At 9.65 °dH, Tespe is in the hardness range “medium” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).

Baby food and low sodium: tap water in Tespe next to the bottled-water thresholds

Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Tespe are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)

For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks.

Values at the waterworks next to the maximum levels for bottled water “suitable for infant food”
SubstanceMaximum levelValue in Tespe
Sodium20 mg/l25.6 mg/l – above the bottled-water threshold
Nitrate10 mg/l1.2 mg/l – not above
Nitrite0.02 mg/lnot in the report
Sulphate240 mg/l8.2 mg/l – not above
Fluoride0.7 mg/l0.11 mg/l – not above
Manganese0.05 mg/lbelow the detection limit (0.002 mg/l) – not above
Arsenic0.005 mg/lbelow the detection limit (0.001 mg/l) – not above
Uranium0.002 mg/lbelow the detection limit (0.00001 mg/l) – not above

Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).

Frequently asked questions about tap water in Tespe

Can you drink the tap water in Tespe?

According to the verified values, yes: All tested parameters with a legal limit (15) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 100 out of 100 (data coverage: 4 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.

How hard is the water in Tespe?

The total hardness is 9.65 °dH – hardness range “medium”. Dose detergent for the hardness range “medium”.

Is there PFAS in the tap water in Tespe?

The published analysis by Wasserbeschaffungsverband Harburg that we evaluated gives no PFAS value. This does not mean there is no PFAS in the water; there is simply no figure for it. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. The supplier can tell you whether PFAS was measured and with what result.

Do I need to filter my tap water in Tespe?

Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.

WaterScore

Data coverage: 4 of 7 core parameters. Not in the test report: Nitrite, Copper and PFAS (sum). Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v4: how we calculate the WaterScore.

Evidence: cite and check

Suggested citation: Trinkwassermonitor (2026): Tap water in Tespe. Values according to the water supplier’s test report, sampling date 9 March 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/tespe/

JSON: /api/v1/evidence?city=tespe

Data as of: 9 March 2026 · verified: 19 of 19 evaluated parameters.

This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Tespe. Retrieved from https://trinkwassermonitor.ink/en/tap-water/tespe/.”

Further information