Water hardness and tap water in Maintal
Main-Kinzig-Kreis, Hessen · Postcode 63477
This page is a translation of the German version; the German page is authoritative. German version · Report a translation error
- Limits of the Drinking Water OrdinancemetAll tested parameters (20), at the waterworks
- Water hardness7.52 °dH, softNo legal limit, only a range
- Data coverageCore parameters: 7 of 7Score based on complete data
Verified drinking-water values
Note from the test report (in the German original): Maintal-Werke · Analysenbericht des Zentrallabors der Hessenwasser zur Probenahme am 11.05.2026 im Ortsnetz Dörnigheim, entnommen an einer Küchenarmatur, also einschließlich Hausinstallation; Werte wie Kupfer, Blei und Nickel hängen auch von den Leitungen im Gebäude ab. Die Maintal-Werke beproben die Ortsnetze im Wechsel: Bischofsheim (16.03.2026) hatte 6,28 °dH, Wachenbuchen (25.08.2025) 7,16 °dH, ebenfalls weich. Alle 20 PFAS lagen unter 0,001 µg/l; eine Summe weist der Bericht deshalb nicht aus.
Background on household plumbing, not a measurement: in Maintal, 50 % of buildings with living space were built before 1970, and a further 19 % between 1970 and 1979 (Zensus 2022, Statistisches Bundesamt, dl-de/by-2-0). (Zensus 2022) According to the German Environment Agency (Umweltbundesamt), lead pipes exist at most in houses built before 1973 – and by no means in all of them. Whether there are any in your house is known to the owner or a plumber. (UBA)
What the values mean for Maintal
- Nitrate 10.4 mg/L – about 21 % of the limit of 50 mg/L and in the medium range – such values occur in catchments shaped by agriculture. Boiling does not reduce nitrate.
- PFAS (sum of PFAS-20) – not detectable in the sample evaluated. The limit of 0.1 µg/L (100 ng/L) has applied since 12 January 2026.
- Lead 0.16 µg/L – about 2 % of the limit of 10 µg/L, measured at the waterworks. Today’s limit is met; it will drop to 5 µg/L on 12 January 2028. Lead from household plumbing (old lead pipes) comes on top of this and is not covered by this value.
- Uranium 0.33 µg/L – unremarkable against a limit of 10 µg/L. In some regions uranium occurs naturally from the rock (geogenic).
- pH 7.81 – within the range of the Drinking Water Ordinance (6.5 to 9.5). The pH determines how corrosive the water is in household plumbing.
Water hardness in Maintal in everyday life
At 7.52 °dH, Maintal is in the hardness range “soft” (soft: below 8.4 °dH, medium: 8.4–14 °dH, hard: above 14 °dH).
- Dose detergent for the hardness range “soft” – the lowest amount on the pack.
- Limescale deposits are rare; kettles and coffee machines only need descaling every few months.
- At this hardness you do not need limescale protection or a water softener.
Baby food and low sodium: tap water in Maintal next to the bottled-water thresholds
Bottled water may only be labelled “suitable for preparing infant food” („geeignet für die Zubereitung von Säuglingsnahrung“) if it keeps to the maximum levels of the German Mineral and Table Water Ordinance (Mineral- und Tafelwasser-Verordnung, Annex 6). Here the published values for Maintal are shown next to them, each substance on its own. This is a comparison with labelling thresholds for bottled water, not a statement on whether your tap water is suitable for baby food. (Min/TafelWV, Anlage 6)
| Substance | Maximum level | Value in Maintal |
|---|---|---|
| Sodium | 20 mg/l | 7.73 mg/l – not above |
| Nitrate | 10 mg/l | 10.4 mg/l – above |
| Nitrite | 0.02 mg/l | below the detection limit (0.03 mg/l) – cannot be assessed |
| Sulphate | 240 mg/l | 16.1 mg/l – not above |
| Fluoride | 0.7 mg/l | below the detection limit (0.1 mg/l) – not above |
| Manganese | 0.05 mg/l | below the detection limit (0.001 mg/l) – not above |
| Arsenic | 0.005 mg/l | 0.00048 mg/l – not above |
| Uranium | 0.002 mg/l | 0.00033 mg/l – not above |
Against the other thresholds of Annex 6, the water would qualify as: low in sodium (“suitable for a low-sodium diet”) (Sodium 7.73 mg/l, threshold below 20 mg/l).
For context: the German Environment Agency (Umweltbundesamt) considers preparing baby food with bottled water carrying this label necessary only in rare cases, for example when tap water is temporarily allowed to contain more than 50 mg/l nitrate. (UBA 2016, p. 59) Water from lead pipes in the house is always unsuitable for infants. (UBA 2020, p. 16) The values apply at the waterworks. Questions about baby food are answered by your midwife, your paediatrician and the health office (Gesundheitsamt).
Frequently asked questions about tap water in Maintal
Can you drink the tap water in Maintal?
According to the verified values, yes: All tested parameters with a legal limit (20) meet the limits set by the German Drinking Water Ordinance (TrinkwV). WaterScore: 100 out of 100 (data coverage: 7 of 7 core parameters). This applies to the water from the waterworks – restrictions can only arise from old household plumbing.
How hard is the water in Maintal?
The total hardness is 7.52 °dH – hardness range “soft”. Dose detergent for the hardness range “soft” – the lowest amount on the pack.
Is there PFAS in the tap water in Maintal?
Not in measurable amounts: according to the published analysis by Maintal-Werke (as of 11 May 2026), PFAS were below the laboratory’s limit of quantification. Since 12 January 2026, a limit of 0.1 µg/l has applied to the sum of PFAS-20. This means the sum of the four substances PFOA, PFOS, PFNA and PFHxS (PFAS-4) is also below the limit of 0.02 µg/l, which applies from 12 January 2028.
Do I need to filter my tap water in Maintal?
Based on the verified supplier values, a filter is not necessary. It can make sense if you do not like the taste. If you suspect lead pipes in an old building, a filter does not help; a laboratory analysis at the tap does – that is a question of the household plumbing, not of the water leaving the works.
WaterScore
- Total100 / 100
- Chemical safety100 / 100
- Heavy metals100 / 100
- PFAS100 / 100
- Nutrients100 / 100
- General parameters100 / 100
- Data timeliness100 / 100
- Data quality100 / 100
Data coverage: 7 of 7 core parameters. Missing parameters are neither estimated nor counted as harmless: the score is based only on the values available. It is not a health assessment and says nothing about the water beyond the service connection. Methodology v3: how we calculate the WaterScore.
Evidence: cite and check
- Analysenbericht 202622349, Ortsnetz Dörnigheim, Probenahme 11.05.2026 (Befundausgabe 06.07.2026) (Maintal-Werke GmbH (Analyse: Hessenwasser GmbH & Co. KG, Zentrallabor))
Suggested citation: Trinkwassermonitor (2026): Tap water in Maintal. Values according to the water supplier’s test report, sampling date 11 May 2026; at the waterworks, not household plumbing. https://trinkwassermonitor.ink/en/tap-water/maintal/
JSON: /api/v1/evidence?city=maintal
Data as of: 11 May 2026 · verified: 25 of 25 evaluated parameters.
This page shows only verified test data with sources, or states explicitly where data is missing (no estimated values). Cite as: “Trinkwassermonitor (2026). Tap water in Maintal. Retrieved from https://trinkwassermonitor.ink/en/tap-water/maintal/.”